You are currently viewing Netgear Extender stop working after Firmware update. How to Fix it?

Netgear Extender stop working after Firmware update. How to Fix it?

In today’s digital world, having a strong and reliable internet connection is a must. So, if your Netgear extender suddenly stops working after a firmware update, it can be frustrating. But don’t worry! In this guide, we’ll show you step-by-step how to fix it and get your internet back on track.

Netgear Extender Troubles After an Update

Think of a firmware update as giving your Netgear extender a makeover. It brings new features and fixes bugs, but sometimes it can cause problems. If your extender has gone on strike after an update, you’re not alone.  Let’s figure out why and how to fix it.

Signs Your Netgear Extender Is Giving You a Hard Time

Before we jump into solutions, let’s check if your extender is acting up. Look out for these signs:

Weak Wi-Fi Signal

Is your Wi-Fi connection suddenly weak or unreliable? That’s a sign something’s wrong with your extender.

Can’t Access the Setup Page

Trying to visit the setup page at “” but can’t get in? That’s not a good sign.

Blinking Lights Everywhere

Are the lights on your Netgear extender flashing like crazy? That’s a clear indicator of trouble.

Devices Keep Disconnecting

Do your devices keep losing their connection to the internet? It’s frustrating, right?

Internet Slows to a Crawl

Is your once-speedy internet now painfully slow? That’s not what you signed up for.

Now that we’ve identified the problem, let’s get to the solutions!

How to Fix Your Netgear Extender

Restart Your Extender

When in doubt, the old trick of turning it off and on again can work wonders. Here’s how:

  1. Unplug: Take out the power plug from your extender.
  2. Wait. Give it a 30-second breather.
  3. Plug Back In: Put the power plug back in and let it start up.
  4. Reconfigure: If the problem sticks around, you might need to set up your extender again. Go to “” and follow the instructions.

Check for Another Firmware Update

It might sound strange, but sometimes a second firmware update can fix the issues from the first one. Here’s what you can do:

  1. Access Extender Settings: Go to “mywifiext net” and log in to your extender.
  2. Look for updates: Check if there’s another firmware update available.
  3. Update again: If there is, go ahead and install it.
  4. Restart: After the update, restart your extender to make sure the changes take effect.

Reset to Factory Settings as a Last Resort

If nothing else works, you might have to do a factory reset, but be careful because this will erase all your settings.

  1. Find the Reset Button: Usually, there’s a small reset button on your extender.
  2. Press and Hold: Use a paperclip or something similar to press and hold the reset button for about 10 seconds.
  3. Set Up Again: After the extender restarts, you’ll need to set it up from scratch using or “”

Frequently Asked Questions (FAQs)

Why Did My Netgear Extender Stop Working After a Firmware Update?

Answer: Sometimes, firmware updates can introduce bugs or problems that make your extender act up. It happens to the best of us.

Can I Avoid Firmware Update Issues in the Future?

Answer: While you can’t completely prevent these problems, you can reduce the risk by regularly checking for updates and making sure your extender works with your router.

What If I Forgot My Extender’s Login Details for mywifiext?

Answer: No worries! You can usually find the default login details in your extender’s manual or on a sticker on the bottom.

Read More: How can I change the default Netgear extender password?

Is It Safe to Perform a Factory Reset?

Answer: Yes, it’s safe, but remember that it erases all your settings. Only do a factory reset as a last resort.

Do I Need a Technician to Fix My Extender?

Answer: Not usually. Most problems can be solved by following the steps in this guide. But if you’re still stuck, it might be a good idea to get professional help.


In the world of technology, glitches and hiccups are common. So, if your Netgear extender has decided to take a break after a firmware update, don’t worry. Follow the steps we’ve outlined, and you’ll likely have it working again in no time. Remember, the “Netgear Extender stop working” issue is temporary, and with a bit of troubleshooting tips for Netgear extender setup, you’ll be back online and enjoying a strong internet connection. Happy surfing! 

Leave a Reply