Netgear EAX15 Setup is relatively simple. The AX1800 Wifi Mesh Extender EAx15 is a wireless range extender created to increase the Wi-Fi coverage of your current network in weak signal areas. The general steps for Netgear extender setup are as follows:

Before beginning:

  1. Verify that your home or place of business has a functioning Wi-Fi network.
  2. When configuring the Netgear EAX15, place it close to your current Wi-Fi router.


Setting Up Netgear EAX15 using a Web Browser

The Netgear EAX15 | AX1800 is a powerful and easy-to-use dual-band Wi-Fi 6 range extender designed to boost and expand your existing Wi-Fi network. Setting up Netgear EAX15 is hassle-free, and you can easily configure it using the web-based setup wizard or the Netgear Genie mobile app. Additionally, the extender supports Wi-Fi Protected Setup (WPS) for quick and straightforward installation with compatible routers. 

Here are the following steps for Netgear EAX15 Extender manual setup:

  •  The EAX15 needs to be connected to an electrical outlet near your WiFi router.
  •  Keep an eye out for the power LED to turn solid white or green.
  • With the EAX15, establish a Wi-Fi connection.
  • Launch a web browser (like Chrome, Firefox, or Safari).
  • Start the installation assistant: or should be typed into the web browser’s address bar.
  • Enter the default login information if prompted
  • Choose Your Password and Network Name (SSID)
  • Once the setup is complete, the Netgear EAX15 will reboot, and the settings will take effect. 
Netgear EAX15 setup

Simply contact our team of highly qualified technical experts, who are available to help you anytime, by dialing our toll free number +1-323-471-3045 or by email at [email protected], for a hassle-free solution to all your technical problems.

Netgear EAX15 Setup via WPS

You can quickly and securely connect your Netgear EAX15 WiFi range extender using the Wi-Fi Protected Setup (WPS) button. The Netgear EAX15 Setup can be completed without using a smart device or a username and password.

Here are the instructions for the Netgear EAX15 Setup:

  • A power outlet should be connected to the extender.
  • Before you start, wait for the Power LED to turn green.
  • On the extender’s side panel, press the WPS button.
  • On the back or side panel of your current router, press the same WPS button.
  • The extender LEDs turn entirely green once the connection is made.

Table of Contents

Netgear EAX15 Firmware update

Keeping the firmware of your Netgear EAX15 up to date is essential for performance, security, and bug fixes. Firmware updates are provided by the Netgear time to time. Follow the steps mentioned below to upgrade the Netgear EAX15 firmware:

Netgear extender firmware update
  1. Check out the login page.
  2. Find the firmware updates that are available for your device.
  3. Install the most recent firmware update on your computer.
  4. Launch a web browser and follow the setup section’s instructions to log into the EAX15’s configuration page.
  5. Select “Settings” or “Advanced” to find the Firmware Update section.
  6. Click the “Browse” or “Choose File” button to select the firmware file that was downloaded.
  7. To start the firmware update process, adhere to the on-screen instructions. 

Common Netgear EAX15 extender issues

Here are some common Netgear EAX15 extender issues:

  • Cannot detect the SSID.
  • Slow or intermittent connection
  • Dropped connections. 
  • Cannot connect to the internet.
  • The WiFi extender is not transmitting any WiFi signals.
  • There is no internet connection on the extender.
  • You don’t seem to be able to access the extender’s settings. Verify Netgear default IP address before attempting to access the extender’s settings.


If you are experiencing these problems, you can dial our toll free number +1-323-471-3045 or drop us an email to [email protected], you can get in touch with our team of highly qualified technical experts who are ready to help you whenever you need it.

Netgear Extender Common issues

Troubleshooting Tips for Netgear EAX15 Setup issues

If you encounter any issues with Setting up the Netgear EAX15, try the following troubleshooting tips:

Netgear extender setup troubleshooting tips
  1. Make sure the appliance is turned on and plugged into a functional outlet. 
  2. You could try relocating the extender to a different area with better signal reception or one that is closer to your primary router. Performance might be improved as a result of this.
  3. Wait a short while, then disconnect the EAX15 and your primary router from the power source.
  4. Make sure that all of your devices are logged into the extended network name (SSID) that EAX15 generated.
  5. Check that the password you are using to connect to the extended Wi-Fi network is the right one.
  6. Keep the EAX15 free of anything that could interfere with the Wi-Fi signal, either electronically or physically.
  7. Verify that the EAX15 is running the most recent firmware. Refer to the aforementioned “Firmware Update” section for more information.
  8. If all else fails, you can try to reset the EAX15 to its factory settings 

Remember that the troubleshooting steps may vary slightly depending on the specific model. Always refer to our technical experts they will guide you through the resources provided by Netgear for the most accurate and up-to-date information.