The Netgear AC1200 extends the current WiFi range and provides WiFi speeds of up to 2Gbps. To strengthen the WiFi network at home, this extender gadget collaborates with the existing wireless network. If you want to extend the present WiFi range of the router, the Netgear Extender Setup is the best option. It increases wireless signal strength and coverage so you can stream online without interruption. The detailed instructions that walk you through the Netgear AC1200 setup process are provided in this post. To learn how to set up a Netgear AC1200 Extender, scroll down. Continue reading. 

What is Netgear AC1200 Extender?

The Netgear AC1200 Extender is a wireless device designed to boost Wi-Fi coverage in homes or offices. It extends existing Wi-Fi signals, reducing dead zones and providing improved connectivity for devices. With dual-band technology, it offers faster data transfer rates and a seamless internet experience in areas with weak signals.

Benefits of using Netgear AC1200 Extender 

  • Expanded Wi-Fi coverage.
  • Enhanced signal strength.
  • Reduced dead zones.
  • Improved connectivity for devices.
  • Seamless streaming and online gaming.
  • Multiple device support.
  • Simple setup process.
  • Dual-band technology.
  • Fast data transfer rates.
  • Reliable and consistent performance.
Netgear AC1200 setup

Netgear AC1200 Setup via Manual Method 

So let’s look at the detailed instructions for manually setting up a Netgear AC1200 extender:

  • Start by plugging the Netgear AC1200 extender into an electrical socket.
  • Once the AC1200’s power led light is turned on.
  • Connect a wireless device to the “NETGEAR_Ext” default network.
  • Now open a web browser and enter the IP address of or in the search field.
  • This is the Mywifiext Login page, where you are now.
  • To connect the booster to your current home network, follow the on-screen directions.


This is how you manually configure your Netgear AC1200. The WPS Setup is another way for setting up your booster, so using a manual technique is not your only choice. In the article that follows, we’ll go over WPS configuration for your extender.

Table of Contents

How Do I Use WPS to Configure My Netgear AC1200 Extender?

You can set up your WiFi range extender using the Netgear AC1200 WPS setup procedure in under two minutes. The simplest approach to configure your AC1200 is as follows. If your router doesn’t have a WPS button, you’ll need to set up your Netgear AC1200 in a different way. 

Following are the procedures for setting up a Netgear AC1200 extender using WPS:

  • Locate the WPS button on your extender.
  • Press the WPS button on the extender and then on your router within 2 minutes.
  • Wait for the WPS LED on the extender to turn solid.
  • Connect your devices to the extended network.
  • Enjoy extended Wi-Fi coverage without the need for complex setup.

Note: If you have any additional questions about Netgear AC1200 Setup using WPS, please get in touch with us by calling one of our toll-free numbers or chatting online.Our highly skilled technical team will work with you to find a solution to your issue.

Typical issues with Netgear AC1200 Extender Setup

Netgear extender common issues
  • is not operational.
  • Incorrect mywifiext password

  • There is no internet access even though the WiFi extender is connected.

  • Cannot connect to mywifiext.local 

  • The WiFi extender is not connected to the network.

  • Issues when reaching IP address

  • Even after the Netgear AC1200 setup, the genie smart setup page remains.

  • I forgot the extender’s default password.

  • The LED lights on the Extender are not stable.

Steps for Troubleshooting Netgear AC1200 Extender Setup

Follow the troubleshooting instructions listed below to resolve the Netgear AC1200 setup issues:

  • Make that the extender is getting the right amount of power from the wall outlet.

  • Verify that the wall plug is not broken or short-circuited before plugging in the extender.

  • Get your device a high-speed internet connection.

  • Verify each and every electrical connection. Use only undamaged cables.

  • Make sure you put the right URL in the address box if you are experiencing problems with

  • Perform a single power cycle on your WiFi Mesh Extender before attempting to set up your Netgear AC1200 Extender once more.

Netgear extender setup troubleshooting tips

Netgear AC1200 Extender Firmware Update

Firmware is a type of software that controls the internal functioning of a device. The firmware in a wifi range extender regulates how the extender communicates with the router, how the wireless signal is amplified, and many other functions. Firmware updates are made available by the manufacturer to improve the device’s performance and security, to repair bugs and compatibility concerns, and to introduce new features.

Netgear extender firmware update

To update the firmware on your Netgear AC1200 extender, perform the following steps:

  • Connect your router to the extender.
  • After that, launch a web browser of your choosing.
  • Type into the address bar and click Enter.
  • To access your Extender, log in with your username and password.
  • Navigate to the Settings menu and select the Firmware Upgrade option.
  • Then, press the Check button.
  • If a new firmware version is available, select Yes for firmware upgrade.
  • Allow some time for the Netgear AC1200 firmware to properly update.

How to reset Netgear AC1200 Extender?

Have you lost or misplaced your administrator password? Are you looking for the Netgear Nighthawk AC1200 Reset?If that’s the case, you’ve arrived at the right place. In this blog post, we’ll show you how to perform a factory reset in the simplest way possible.

The following are the steps for performing Netgear AC1200 Extender factory reset:

  • Locate the reset button on the device.
  • Use a paperclip or similar tool to press and hold the button.
  • Hold for about 10 seconds until the LED lights blink. Release the button.
  • Wait for the extender to reboot. Reconfigure the extender’s settings.
  • Connect devices to the default network name and password.


Note: If you are unable to complete the factory reset or Netgear AC1200 setup, please contact us using our toll-free lines or live chat. Our technical experts will assist you in fixing your problem.

Netgear Extender Factory reset