You are currently viewing Techniques to fix Netgear WiFi extender not picking up signal issue

Techniques to fix Netgear WiFi extender not picking up signal issue

People install Netgear wireless range extenders in their houses so that their client devices can access Netgear_ext and have a stable internet connection. However, if the Netgear extender refuses to pick up the signal emitted by the router, one will be unable to connect to the internet, even if it’s a fast one. If you are facing the Netgear WiFi extender not picking up signal issue, you have come to the perfect blog on Google. The reason for this is that you will find all of the necessary hacks to help you solve the problem. However, before you begin using the hacks, you need to first determine what caused the problem. Continue reading.

By the way, be patient when reading the material provided on this site. Rushing through the information will confuse your thinking. And if that happens, you end up inviting far more serious problems than the Netgear WiFi range extender not picking up signal issue.

Why is my Netgear WiFi extender not picking up signal?

Reason 1: Extreme Distance

The primary reason you are experiencing the Netgear WiFi extender not picking up signal issue is that the distance between the networking devices is greater than required. Yes, the extender should not be placed neck-to-neck with the router; yet, too much of it can make it impossible for their signals to go throughout the house. The primary reason you are experiencing the Netgear WiFi extender not picking up signal is that the distance between the networking devices is greater than required. Yes, the extender should not be placed neck-to-neck with the router; yet, too much of it can make it impossible for their signals to go throughout the house.

Reason 2: A defective Ethernet cable.

Another reason why the issue at hand is affecting your internet experience is that the Ethernet cable in use is damaged. Perhaps you connected the extender to the host network using an outdated or worn-out wire rather than the one that came with the Netgear extender when you purchased it. 

Reason 3: Signal Disturbance.

The third and last explanation could be signal interference. It is possible that your extension or router is maintained in a room that shares space with signal-interfering devices such as cordless phones, washing machines, Bluetooth speakers, microwave ovens, treadmills, televisions, baby monitors, and refrigerators.

How do I get a Netgear extender to pick up a router signal?

Solution 1: Get devices a bit closer.

To solve the first cause of the Netgear WiFi extender not picking up signal issue, lower the distance between the range extender and your home network. Keep both of them in the same room. We recommend this so that your Netgear extender can pick up signals coming from the router.

Solution 2: Get a new Ethernet cable.

The second hack for getting out of the situation you’re in is to replace the Ethernet cable you’ve been using to setup Netgear extender to the host router. If you don’t have a spare new Ethernet cable at home, you’ll have to leave the house. Not only that, but you also need to step outside of your comfort zone. Are you prepared for that?

Solution 3: Reduce WiFi disturbances.

Many people have tried relocating the Netgear WiFi range extender to resolve the issue of the Netgear WiFi extender not picking up signals. And it’s worked for them. You should try doing the same. Who knows if it will work for you? If it does, you are welcome to remember us in your prayers.

The Bottom Line

These were the troubleshooting hacks that will help to resolve the Netgear WiFi extender not picking up signal issue. Although you should be able to repair it with the techniques listed above, if you continue to have problems, it could be due to an incorrect configuration. In such a case, you should configure your networking device from scratch using either the WPS technique, the manual approach, or the Nighthawk app. If you want to set up the extender manually with a MAC device, follow our advice and use the mywifiext.local web address. The explanation is that the mywifiext.net web address is incompatible with MAC devices.

For further information on this, please contact our technical experts by dialing our tollfree helpline or via live chat. You will undoubtedly discover all the information you require with your device.