You are currently viewing Admin Login using the default username and password. Admin Login using the default username and password. is a private IP address that can be assigned to a router or another client device as the default gateway. Aside from that, various distinct IP addresses are used as the default router IP, including,, and Some Cisco WiFi router models primarily use the same IP addresses.

However, serves the same purpose as any other default IP address. It allows you to access your WiFi router’s administrative configuration panel. IP addresses inside the 10.0.0.x range might vary, such as or Admin Login Instructions

Follow the steps outlined below to access the default admin login page:

  • Make sure your WiFi router is turned on properly.
  • After booting up your computer, launch an internet browser.
  • You can select any browser, such as Chrome, Firefox, or Safari.
  • Enter into the address bar.
  • Pressing Enter will take you to the router IP login admin panel.
  • In the first field, type the default username, and in the second, enter your passphrase.
  • Click the Login button.

Here’s! You are finished with the default router IP login.

What is the default password and user ID for

The default password and admin user ID are normally listed in the router handbook that came with the purchase. However, if the manual is lost or misplaced, you can try the following combinations:

  • Admin and admin
  • Possible combinations include admin and passphrase, user and admin.  
  • User and password.

Note: Keep in mind that the username and password are case-sensitive, so type them carefully.

What exactly do WiFi routers use

Let’s have a look at the common router brands that use 10.0.0.x as their default gateway IP:

  • Asus 
  • Apple 
  • Billion 
  • Belkin 
  • Cisco 
  • NetComm 
  • Huawei
  • D-Link
  • 2Wire
  • SpeedTouch
  • Zyxel
  • Zoom
  • Sitecom. 
  • Siemens

Didn’t find your router brand on the above list? If this is the case, your WiFi router’s default gateway is set to a different IP address.

How Do I Change My Router IP Address from to

If you are unfamiliar with the default IP address and want to change it to a more common standard, such as, the steps are as follows:

  • Launch your chosen web browser.
  • Navigate to the admin login page.
  • After you log in, navigate to the default gateway IP area.
  • Here, you can modify your router’s default IP address.
  • Don’t forget to save your settings before exiting the page.

Done! Your WiFi router now has the new private IP address,

My router keeps changing to the IP address. What should I do?

Let us be clear: using instead of has no negative consequences. Both IP addresses direct you to the router’s default admin page.

If you put up a server on your network and want to use the IP address, you will encounter a router IP address conflict. Why is that? This is because your WiFi router and network can only be assigned a single unique IP address.

As a result, the router will automatically switch to the default IP address to resolve the traffic identification issue. In this instance, you must set a static IP address for your router. Doing so will undoubtedly help you resolve the router’s IP address problem.

Continue reading for more information about:

Comprehensive Guide to Perform Netgear Genie Setup with Windows 10

Techniques to fix Netgear WiFi extender not picking up signal issue